APPLICATION

STEP 1: Preparation of the nails

  • Apply cuticle remover oil to soften them. Use the flat end to push back the cuticles, exposing the entire nail plate, use the other V-shaped end to gently remove the cuticles.
  • Adjust the shape of the natural nail using step 1 side of the file. Buff the nails horizontally using step 2 side of the file.
  • Use the alcohol wipe to clean the nails, removing filing dust and natural oil.

Attention: After cleaning, do not touch the nail surface with your hands again to avoid getting them dirty.

STEP 2: Application of the adhesive

  • Take out the sticker sheet and choose the suitable shape for each nail.
  • Apply the sticker about 1 mm away from the cuticle (base of the nail).
  • Before removing the protective film, press repeatedly with your finger from the center towards the edges to eliminate all air bubbles and make the sticker adhere perfectly.
  • Remove the transparent protective film. At this stage, do not touch the adhesive surface with your hands; in case it gets dirty, we recommend replacing the adhesive.

STEP 3: Application of the press-on nails

  • Align the base of the press-on nail with the sticker 1 mm from the cuticle. Insert it at a 45-degree angle, pushing gently towards the nail root until it matches perfectly with the cuticle line.
  • Once positioned correctly, press down on the entire surface. Insist on pressing on the base and sides for 15 seconds to ensure complete adhesion between the adhesive and the nail.
  • Repeat for each nail

Tips for prolonging duration

  • If the temperature is low, before application it is recommended to slightly warm the sticker with a hair dryer. The softened adhesive has a stronger grip.
  • Avoid contact with water for the first 2-3 hours after application and let the sticker adhere completely.
  • If you have to keep your hands in water for a long time (e.g., washing dishes), it is recommended to wear gloves to protect the sticker.